//不说那么多了，直接上程序
void ADC1_DeInit(void)
{
ADC1->CSR = ADC1_CSR_RESET_VALUE;
ADC1->CR1 = ADC1_CR1_RESET_VALUE;
ADC1->CR2 = ADC1_CR2_RESET_VALUE;
ADC1->CR3 = ADC1_CR3_RESET_VALUE;
ADC1->TDRH = ADC1_TDRH_RESET_VALUE;
ADC1->TDRL = ADC1_TDRL_RESET_VALUE;
ADC1->HTRH = ADC1_HTRH_RESET_VALUE;
ADC1->HTRL = ADC1_HTRL_RESET_VALUE;
ADC1->LTRH = ADC1_LTRH_RESET_VALUE;
ADC1->LTRL = ADC1_LTRL_RESET_VALUE;
ADC1->AWCRH = ADC1_AWCRH_RESET_VALUE;
ADC1->AWCRL = ADC1_AWCRL_RESET_VALUE;
}
void ADC1_Init(ADC1_ConvMode_TypeDef ADC1_ConversionMode,
ADC1_Channel_TypeDef ADC1_Channel,\
ADC1_PresSel_TypeDef ADC1_PrescalerSelection,\
ADC1_ExtTrig_TypeDef ADC1_ExtTrigger,\
FunctionalState ADC1_ExtTriggerState,\
ADC1_Align_TypeDef ADC1_Align,\
ADC1_SchmittTrigg_TypeDef ADC1_SchmittTriggerChannel,\
FunctionalState ADC1_SchmittTriggerState)
{
/* Check the parameters */
assert_param(IS_ADC1_CONVERSIONMODE_OK(ADC1_ConversionMode));//单次还
是连续转换
assert_param(IS_ADC1_CHANNEL_OK(ADC1_Channel));
assert_param(IS_ADC1_PRESSEL_OK(ADC1_PrescalerSelection));
assert_param(IS_ADC1_EXTTRIG_OK(ADC1_ExtTrigger));
assert_param(IS_FUNCTIONALSTATE_OK(((ADC1_ExtTriggerState))));
assert_param(IS_ADC1_ALIGN_OK(ADC1_Align));
assert_param(IS_ADC1_SCHMITTTRIG_OK(ADC1_SchmittTriggerChannel));
assert_param(IS_FUNCTIONALSTATE_OK(ADC1_SchmittTriggerState));
/*-----------------CR1 & CSR configuration --------------------*/
/* Configure the conversion mode and the channel to convert
respectively according to ADC1_ConversionMode & ADC1_Channel values
& ADC1_Align values */
ADC1_ConversionConfig(ADC1_ConversionMode, ADC1_Channel, ADC1_Align);
/* Select the prescaler division factor according to
ADC1_PrescalerSelection values */
ADC1_PrescalerConfig(ADC1_PrescalerSelection);
/*-----------------CR2 configuration --------------------*/
/* Configure the external trigger state and event respectively
according to NewState, ADC1_ExtTrigger */
ADC1_ExternalTriggerConfig(ADC1_ExtTrigger, ADC1_ExtTriggerState);
/*------------------TDR configuration ---------------------------*/
/* Configure the schmitt trigger channel and state respectively
according to ADC1_SchmittTriggerChannel & ADC1_SchmittTriggerNewState
values */
ADC1_SchmittTriggerConfig(ADC1_SchmittTriggerChannel,
ADC1_SchmittTriggerState);
/* Enable the ADC1 peripheral */
ADC1->
CR1 |= ADC1_CR1_ADON;
}
void ADC1_Cmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE)
{
ADC1->CR1 |= ADC1_CR1_ADON;
}
else /* NewState == DISABLE */
{
ADC1->CR1 &= (u8)(~ADC1_CR1_ADON);
}
}
void ADC1_StartConversion(void)
{
ADC1->CR1 |= ADC1_CR1_ADON;
}
FlagStatus ADC1_GetFlagStatus(ADC1_Flag_TypeDef Flag)
{
u8 flagstatus = 0;
u8 temp = 0;
/* Check the parameters */
assert_param(IS_ADC1_FLAG_OK(Flag));
if ((Flag & 0x0F) == 0x01)
{
/* Get OVR flag status */
flagstatus = (u8)(ADC1->CR3 & ADC1_CR3_OVR);
}
else if ((Flag & 0xF0) == 0x10)
{
/* Get analog watchdog channel status */
temp = (u8)(Flag & 0x0F);
if (temp < 8)
{
flagstatus = (u8)(ADC1->AWSRL & (1 << temp));
}
else
{
flagstatus = (u8)(ADC1->AWSRH & (1 << (temp - 8)));
}
}
else /* Get EOC | AWD flag status */
{
flagstatus = (u8)(ADC1->CSR & Flag);
}
return ((FlagStatus)flagstatus);
}
u16 ADC1_GetConversionValue(void)
{
u16 temph = 0;
u8 templ = 0;
if (ADC1->CR2 & ADC1_CR2_ALIGN) /* R