到目前为止，已经能够成功启动内核了，接下来我们会在新内核的基础上添加tq335x板载驱动。
本文作者：girlkoo
本文链接：http://blog.csdn.net/girlkoo/article/details/41258583
AM335x(TQ335x)学习笔记――使用dtb方式挂载ramdisk(三)
[ 1.578104] omap2-nand: probe of omap2-nand.0 failed with error -22
[ 1.691744] tps65910 0-002d: No interrupt support, no core IRQ
[ 1.709178] vrtc: 1800 mV
[ 1.712892] vrtc: supplied by vbat
[ 1.719981] vio: at 1500 mV
[ 1.723353] vio: supplied by vbat
[ 1.730169] vdd_mpu: 912 <--> 1312 mV at 1325 mV
[ 1.735377] vdd_mpu: supplied by vbat
[ 1.742659] vdd_core: 912 <--> 1150 mV at 1137 mV
[ 1.747889] vdd_core: supplied by vbat
[ 1.754583] vdd3: 5000 mV
[ 1.760090] vdig1: at 1800 mV
[ 1.763611] vdig1: supplied by vbat
[ 1.769998] vdig2: at 1800 mV
[ 1.773480] vdig2: supplied by vbat
[ 1.779839] vpll: at 1800 mV
[ 1.783256] vpll: supplied by vbat
[ 1.789576] vdac: at 1800 mV
[ 1.792977] vdac: supplied by vbat
[ 1.799236] vaux1: at 1800 mV
[ 1.802749] vaux1: supplied by vbat
[ 1.809109] vaux2: at 3300 mV
[ 1.812606] vaux2: supplied by vbat
[ 1.818973] vaux33: at 3300 mV
[ 1.822579] vaux33: supplied by vbat
[ 1.829010] vmmc: 1800 <--> 3300 mV at 3300 mV
[ 1.834051] vmmc: supplied by vbat
[ 1.840026] vbb: at 3000 mV
[ 1.843609] vbb: supplied by vbat
[ 1.848858] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.862630] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[ 1.972271] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 1.978680] davinci_mdio 4a101000.mdio: detected phy mask ffffffde
[ 1.988850] libphy: 4a101000.mdio: probed
[ 1.993152] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown
[ 2.001513] davinci_mdio 4a101000.mdio: phy[5]: device 4a101000.mdio:05, driver unknown
[ 2.011094] cpsw 4a100000.ethernet: Detected MACID = c4:ed:ba:88:b5:e4
[ 2.022260] input: volume_keys@0 as /devices/volume_keys@0/input/input0
[ 2.032966] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 2.041988] sr_init: No PMIC hook to init smartreflex
[ 2.047636] sr_init: platform driver register failed for SR
[ 2.071187] lis3_reg: disabling
[ 2.078305] RAMDISK: gzip image found at block 0
[ 2.088654] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.114634] mmc0: new high speed SDHC card at address aaaa
[ 2.124023] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.145511] mmcblk0:
[ 2.264995] VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
[ 2.273502] devtmpfs: mounted
[ 2.277355] Freeing unused kernel memory: 404K (c07ba000 - c081f000)
----------mount all..........
----------Starting mdev......
Please press Enter to activate this console.
@tq335x #ls
HOSTNAME dev lib mnt sbin usr
bin etc linuxrc proc sys var
boot home lost+found root tmp
（4）小结