9/27/04 - update case statement (3914991)
# gdyoung 09/17/04 - ;;
# gdyoung 08/20/04 - ple/st script merging
# dliu 08/04/04 - get them work on linux
# dliu 11/20/03 - support for trace
# dliu 11/12/03 - unset ORA_CRSDEBUG
# bhamadan 09/18/03 - replacing s_jre131Location with s_jreLocation
# khsingh 06/25/03 - remove policy file
# rxkumar 06/03/03 - add srvmasm.jar
# rdasari 06/02/03 - set LD_LIBRARY_PATH appropriately for 32 and 64 bit solaris platforms
# dliu 02/21/03 - add i18n.jar
# dliu 11/13/02 - use ORA_CRS_UI_FMT to turn on output capture
# dliu 10/17/02 - turn on output capture
# jtellez 10/04/02 - make policy ==
# surchatt 09/06/02 - puttint policy file location
# rdasari 08/07/02 - use java instead of jre
# rdasari 08/01/02 - use jdk131
# jtellez 07/26/02 - add srvmhas.jar to classpath
# rdasari 05/09/01 - changing the header information
# rdasari 03/22/01 - changing to ops to srv.
# dliu 03/02/01 - use "$@" for argument list. this iscritical for correct interpretation of arguments with spaces in them..
# dliu 02/26/01 - fix bug #1656127: SHLIB_PATH change.
# dliu 02/23/01 - replace $ORACLE_HOME in classpath with an install variable..
# jcreight 11/08/00 - define OPSMJAR, not OPSJAR
"srvctl" 171L, 5554C
126 JRE_OPTIONS="-d64"
127 ;;
128 esac
129 ;;
130 OSF1) LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/srvm/lib:$LD_LIBRARY_PATH
131 export LD_LIBRARY_PATH
132 ;;
133 Darwin)
134 DYLD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/srvm/lib:$DYLD_LIBRARY_PATH
135 export DYLD_LIBRARY_PATH
136 ;;
137 *) if [ -d $ORACLE_HOME/lib32 ];
138 then
139 LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$ORACLE_HOME/srvm/lib32:$LD_LIBRARY_PATH
140 else
141 LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/srvm/lib:$LD_LIBRARY_PATH
142 fi
143 export LD_LIBRARY_PATH
144 ;;
145 esac
146
147
148 # turn off crs debug flag that would otherwise interfere with crs profile
149 # modification
150 ORA_CRSDEBUG=0
151 export ORA_CRSDEBUG
152
153 # environment variable to turn on trace: set SRVM_TRACE to turn it on.
154 if [ "X$SRVM_TRACE" != "X" ]
155 then
156 TRACE="-DTRACING.ENABLED=true -DTRACING.LEVEL=2"
157 else
158 TRACE=
159 fi
160
161 if [ "X$SRVM_TRACE" != "X" ]
162 then
163 echo $JRE $JRE_OPTIONS -classpath $CLASSPATH $TRACE oracle.ops.opsctl.OPSCTLDriver "$@"
164 fi
165
166 #Remove this workaround when the bug 3937317 is fixed
167 LD_ASSUME_KERNEL=2.4.19
168 export LD_ASSUME_KERNEL
169 unset LD_ASSUME_KERNEL
170
171 # Run ops control utility
"srvctl" 173L, 5578C written
?
2、在任意一个节点上使用oifcfg配置public和vip网络
[root@rh2 bin]# ./oifcfg setif -global eth0/192.168.6.0:public
[root@rh2 bin]# ./oifcfg setif -global eth1/10.10.10.0:cluster_interconnect
[root@rh2 bin]# ./oifcfg getif
eth0 192.168.6.0 global public
eth1 10.10.10.0 global cluster_interconnect
-- 注意这里最后一个是0. 代表一个网段。 在一个节点设置之后，其他节点也能看到。
[root@rh1 bin]# ./oifcfg getif
eth0 192.168.6.0 global public
eth1 10.10.10.0 global cluster_interconnect
?
这时候没有必要再返回重新执行root.sh了，需要我们手工执行vipca命令来为两个节点添加一些必要的进程，至于在哪个节点上运行，这个就无所谓了，这里我是在RAC2上(root用户)执行vipca命令：
在空白处填写各节点对应的vip名称以及IP地址（其实只要填写RAC1的vip名称，再点其他空白处，就自动获取出来了），点击“next”
?
这个地方安装完之后就可以点击“ok”退出了。这里我们手工运行完vipca之后，如果成功，那么相当于RAC2的root.sh也顺利完成使命，下一步需要做的就是返回到RAC1节点，执行剩下的步骤，如下图所示：
点击OK
开始安装后的检验
?
这里有一个小插曲，在node1跑orainstR