Hostname
Vi /etc/hosts加上IP 主机名
关闭防火墙
[root@linux-6-64 Desktop]# vi/etc/selinux/config
SELINUX=disabled
[root@linux-6-64 Desktop]# service iptablesstop
iptables: Flushing firewall rules: [ OK ]
iptables: Setting chains to policy ACCEPT:filter [ OK ]
iptables: Unloading modules: [ OK ]
[root@linux-6-64 Desktop]# serviceip6tables stop
ip6tables: Flushing firewall rules: [ OK ]
ip6tables: Setting chains to policy ACCEPT:filter [ OK ]
ip6tables: Unloading modules: [ OK ]
修改系统参数：vi /etc/sysctl.conf
kernel.shmall = 4294967296
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
使其立即生效：[root@linux-6-64 Desktop]# /sbin/sysctl -p
需要的rpm包如下：
binutils-2.20.51.0.2-5.11.el6 (x86_64)
compat-libcap1-1.10-1 (x86_64)
compat-libstdc++-33-3.2.3-69.el6 (x86_64)
compat-libstdc++-33-3.2.3-69.el6 (i686)
gcc-4.4.4-13.el6 (x86_64)
gcc-c++-4.4.4-13.el6 (x86_64)
glibc-2.12-1.7.el6 (i686)
glibc-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6 (i686)
ksh
libgcc-4.4.4-13.el6 (i686)
libgcc-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6 (i686)
libstdc++-devel-4.4.4-13.el6 (x86_64)
libstdc++-devel-4.4.4-13.el6 (i686)
libaio-0.3.107-10.el6 (x86_64)
libaio-0.3.107-10.el6 (i686)
libaio-devel-0.3.107-10.el6 (x86_64)
libaio-devel-0.3.107-10.el6 (i686)
libXext-1.1 (x86_64)
libXext-1.1 (i686)
libXtst-1.0.99.2 (x86_64)
libXtst-1.0.99.2 (i686)
libX11-1.3 (x86_64)
libX11-1.3 (i686)
libXau-1.0.5 (x86_64)
libXau-1.0.5 (i686)
libxcb-1.5 (x86_64)
libxcb-1.5 (i686)
libXi-1.3 (x86_64)
libXi-1.3 (i686)
make-3.81-19.el6
sysstat-9.0.4-11.el6 (x86_64)
unixODBC-2.2.14-11.el6 (64-bit) or later
unixODBC-devel-2.2.14-11.el6 (64-bit) or later
本文采用yum命令安装，也可以选择使用rpm –ivh来安装。
执行以下语句把光盘挂到磁盘上：
[root@linux-6-64 Desktop]# mount /dev/cdrom /mnt
mount: block device /dev/sr0 iswrite-protected, mounting read-only
进入以下目录：
[root@linux-6-64 Desktop]# cd /etc/yum.repos.d/
删除里面的文件并新建一个repo文件：
[root@linux-6-64 yum.repos.d]# rm -rf *.repo
[root@linux-6-64 yum.repos.d]# vi rhel-info.repo
把以下内容添加到新文件中：
[Server]
name=Server
baseurl=file:///mnt/Server
enabled=1
gpgcheck=1
执行以下命令：
[root@linux-6-64 yum.repos.d]# yum clean all
Loaded plugins: product-id,refresh-packagekit, security, subscription-manager
Updating certificate-based repositories.
Cleaning repos: Server
Cleaning up Everything
[root@linux-6-64 yum.repos.d]# yum update
Loaded plugins: product-id,refresh-packagekit, security, subscription-manager
Updating certificate-based repositories.
Server | 4.0 kB 00:00 ...
Server/primary_db | 3.1MB 00:00 ...
Setting up Update Process
No Packages marked for Update
接下来就可以使用yum命令了：
进去rpm包的目录：cd /mnt/Packages
执行yum install unixODBC-2.2.14-11.el6 unixODBC-devel-2.2.14-11.el6sysstat-9.0.4-11.el6 make-3.81-19.el6 libXi-1.3 libXi-1.3libaio-devel-0.3.107-10.el6 libaio-devel-0.3.107-10.el6 libXext-1.1 libXext-1.1libXtst-1.0.99.2 libXtst-1.0.99.2 libX11-1.3 libX11-1.3 libXau-1.0.5libXau-1.0.5 libxcb-1.5 libxcb-1.5 binutils-2.20.51.0.2-5.11.el6compat-libcap1-1.10-1 compat-libstdc++-33-3.2.3-69.el6compat-libstdc