自己的小米1+android 原生 4.1.2，亲测不可用。

方法二：

OK people thanks to UksusoFF 's help and my own Linux background i was able to have my phone fixed and running. No more screen going offs & phone locks!!
I see that many of you had asked for a step by step process on working with the command line for disabling the proximity censor right :cool:
Well here it goes folks , the complete step by step：
1 - You have to be ROOT to complete this task so ROOT your phone (There are many links on google on HowTo ROOT your phone so do it!!!)

操作前提：手机必须root !

2- Open the Emulator on your phone.

打开手机上的终端模拟器（如果没有，去市场搜索下载安装，或者使用在cmd 终端 使用adb shell ,如果有电脑有配置adb环境的话）

3- Type suand make sure that$ sign changes to # meaning you are the ROOT User now and can make serious changes to your device's system.

输入 su ,获取管理员权限，此时应该会看到开头的 $ 符号变成了 # 号，说明成功获取超级用户（即管理员）权限。

4- Insert the following commands in the Emulator

随后输入下列指令

# cd /data/local
# touch userinit.sh
# echo "#!/system/bin/sh" > userinit.sh
# echo "#" >> userinit.sh
# echo "chmod 0000 /dev/cm3602" >> userinit.sh
# echo "chmod 000 /dev/cm3602" >> userinit.sh
# chmod 777 userinit.sh

5- Now verify that the file exists

然后输入下一句指令来检查userinit.sh文件是否成功创建并且内容输入是否正确

# cat userinit.sh

(You should see the information inserted above appearing).

再一次对比确认输入的内容

6- Restart your phone

重启手机

If you have done it right , your phone should be fine now. Starting now You will be in charge of turning on/off your screen instead of the proximity censor.
Hope it works for ya:rolleyes:
Cheers!:p

此方法在米一测试不可用。

方法三：

去市场搜索下载安装 HardWare Disabler,安装后打开应用，能够看到自己手机的所有硬件驱动的代号和开关选项，找到 /sys/bus/i2c/drivers/isl29028 目录下的代号为0-0044的驱动，勾选disable之后就能够成功禁用距离感应器了。

由于前两种办法在这我手机上都not works，只能自己摸索出第三个办法，还是在不小心关错了一个重要的驱动差点导致重刷的教训之后，才最终得以实现。

目前只在自己的米一上尝试成功了，其他机型未知。

由于不同设备驱动代号不一，自己的所列的代号仅供参考，具体手机具体分析。新手务必慎选，不确定的情况下千万不能乱点，否则后果自负。