2010年初曾经将uboot 2009.11.1移植到我们自己做的一块2440单板上，该单板具有64M SDRAM 和64M nand FLASH，网卡为DM9000。最新版本的uboot源码有较大的变化，此次计划利用几天时间将最新版本的u-boot-2010.12移植到该单板 上，在此记录移植过程及遇到的问题以备忘并供朋友参考。
进入相应路径：
cd /home/bsc
解压缩：
tar jxvf u-boot-2010.12.tar.bz2
进入生成的文件夹，在uboot主目录：
cd u-boot-2010.12
首先编译下看看是否可以编译成功（交叉编译器为4.3.2）：
make distclean /*清除已经形成的链接，修改顶层Makefile文件必须执行*/
make smdk2410_config
[root@localhost u-boot-2010.12]# make smdk2410_config
awk '(NF && $1 !~ /^#/) { print $1 ": " $1 "_config; $(MAKE)" }' boards.cfg > .boards.depend
Configuring for smdk2410 board...
[root@localhost u-boot-2010.12]# make smdk2410_config
Generating include/autoconf.mk
Generating include/autoconf.mk.dep
Configuring for smdk2410 board...
[root@localhost u-boot-2010.12]#
然后make all
make测试一下，产生如下错误
board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)
board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function)
make[1]: *** [board.o] Error 1
make[1]: Leaving directory `/home/bsc/u-boot-2010.12/arch/arm/lib'
make: *** [arch/arm/lib/libarm.o] Error 2
宏未定义，可能是新版uboot的bug
在smdk2410.h中添加
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - GENERATED_GBL_DATA_SIZE)
修改完毕再次编译出现如下错误：
arch/arm/lib/libarm.o: In function `arch_lmb_reserve':
/home/bsc/u-boot-2010.12/arch/arm/lib/bootm.c:74: undefined reference to `get_sp'
arm-linux-ld: BFD (Sourcery G++ Lite 2008q3-72) 2.18.50.20080215 assertion fail /scratch/julian/lite-respin/linux/obj/binutils-src-2008q3-72-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:9537
arm-linux-ld: BFD (Sourcery G++ Lite 2008q3-72) 2.18.50.20080215 assertion fail /scratch/julian/lite-respin/linux/obj/binutils-src-2008q3-72-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:9771
/bin/sh: line 1: 27564 Segmentation fault arm-linux-ld -Bstatic -T u-boot.lds -pie -Ttext 0x33F80000 $UNDEF_SYM arch/arm/cpu/arm920t/start.o --start-group api/libapi.o arch/arm/cpu/arm920t/libarm920t.o arch/arm/cpu/arm920t/s3c24x0/libs3c24x0.o arch/arm/lib/libarm.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/